In this article let us learn How to Bridge Two Car Audio Amps in six easy steps and the advantages of bridging two car amplifiers with tips and warning for doing this job perfectly. Let us learn to get it right the first time itself because wrong connection may blow out the speakers or even burn the amps or sometimes in the worst case both may happen.

The easiest way to improve and enhance the sound of speaker is to connect two car amplifiers together . This also gives lot of power for bigger speakers such as woofers. We may need few things before we start doing this job . They are wrenches, pliers, wire strippers, wire rated for the amplifiers and of course the two amplifiers which we are planning to bridge.

The first step to be done before performing the task is to thoroughly check the manuals of both the amplifiers given by the manufacturer. Only the amplifiers which has got same characteristics like power etc can be bridged. If amplifiers with different power rating are bridged it may lead to malfunction or even damage to the amplifiers. Thus one should ensure that both these amplifiers have same power rating. In case there is any doubt of performing the task or in determining the match among the two it is better to drop the idea of bridging them both.

Next step is to stop the power supply to the amps. Power supply to the amps can be stopped easily by disconnecting the positive cable from the battery of the car. This should be done before any connections are made. To remove the cable we may take help of the wrenches and pliers. Power supply should be completely stopped till our work is completely done .

While buying an amplifier please do check for the presence of the bridge switch. In most amplifiers it is present at the back edge of the amplifier which can be easily spotted. If it is not in bridge mode set it back to that mode. In the next step inch insulation is stripped off from the wire at both ends.

The most important thing to be done is the connection of the wires. The positive terminal of one amplifier holds one end of the wire while the other end is held by the negative terminal of the other amplifier. This can be performed by wrapping them around its corresponding terminal and then screwing them down. There is a clear distinction between the positive and negative terminals which is given by its color difference where red indicates positive and black indicates negative terminal.

The last step is to make the connections complete. Now we have to connect the amplifiers to the speakers. Only one terminal either positive or negative is used for connection with the wire. The other terminals of amplifiers which are free should be connected with the terminals on the speaker. Always ensure that we connect positive terminals of speakers and amplifiers together and negative terminals of speakers and amplifiers together. The speaker system now has improved sound after bridging of amplifiers . Browse through web sites like ehow com for further free tips.

With this article the question of how to bridge two car audio amps becomes easy. Though the instructions are enough to carry out the bridging it is very important to keep in mind that if there is any uncertainty the bridging must not be done. Since this might lead to damage in the speakers and also the amplifiers.

Want to find out more about Car Hifi, then visit Author Name’s site on how to choose the best Car Audio for your needs.

Related posts:

1. What Is A Power Supply Most of th

Related posts brought to you by Yet Another Related Posts Plugin.